Hydraulic Test Bench

                                                                        
Hydrostatic/Burst Test Stand                     Impulse Test Stand                          Volumetric Expansion Test Stand

 

Ⅰ. Hydrostatic/Burst Test Stand

 

Application:

     · Hydraulic inspection

     · Small Valves

     · Pressure Vessels/Gas Cylinders.

     · Hose / Pipe /  Tubing Test.

     · Wellhead Equipments & Components Test

     · Pressure Instruments’ Calibration

     · Automobile parts and Brake Hose Test

     · Fire extinguisher / Fire Hose test

     · Injecting chemical reagents into high pressure reactors

 

 

Technical data:

     · Test medium: Water, Hydraulic Oil, other liquid mediums (please consult factory for special application.)

     · Ambient temperature: -45℃-120℃

     · Driven air: ≤7bar @1.0NM3/min

     · Test pressure: 0-1000Mpa (Common: 0-690MPa)

     · Pressure precision: ±1%F.S

     · Flow range: 0-40L/min

 

Features:

     · Taking air-operated pump as high pressure source, The output pressure and rate of pressure rise can be set freely.

     · High and low pressure pumps provide a wide rang of output pressure and flow.

     · All high pressure valves, pumps, tubing and fittings made in USA with 316SS guarantee the high testing precision and stability.

     · Most of the liquid mediums are applicable.

     · Adopts the technique of solderless connection, easier reuse, assembling and disassembling, and more reliable and safer.

     · Fully automated test stand with high speed data acquisition system

     · History screen and real-time display of pressure-time curves.

     · Test data saved automatically when emergency or power down happens accidentally.

     · Test report exported upon request.

     · Dual pressure relief devices-- automatic pressure relief & manual pressure relief, besides, equipped with alarm system against overtime, overload and leakage. More reliable and safer. *(Optional)

     · Unmanned testing site monitored by camera at real time. *(Optional)

    · Stable and reliable IVS-Test Software features easy operation and user-friendly interface. *(Optional)
                         

Ⅱ. Impulse Test Stand

 

Application:

   · Pressure gauges and other instrumentation. 

   · Small Valves

   · Pressure Vessels/Gas Cylinders.

   · Hose / Pipe /  Tubing Test.

   · Automobile parts. Such as Radiator, Condenser, Brake Pump, Fuel Hoses and Reservoir, etc

 

Technical data:

   · Test medium: Water, Hydraulic Oil, other liquid mediums (please consult factory for special application.)

 · Ambient temperature: -45℃-150℃

 · Driven air: ≤7bar @1.0NM3/min

 · Test pressure: 0-100Mpa

 · Rate of pressure rise: 0-300MPa/s

 · Frequency: 0-1.5Hz

 

 

Features:

 · Stable and reliable IVS-Test Software features easy operation and user-friendly interface. *(Optional)

 · Most of the liquid mediums are applicable.

 · Fully automated test stand with high speed data acquisition system

 · History screen and real-time display of pressure-time curves.

 · Test data saved automatically when emergency or power down happens accidentally.

 · Test report exported upon request

 ·  Wide range and adjustable testing pressure, rate of pressure rise and frequency.

 · Various of test waveform such as Sine wave, square wave, sawtooth, etc. are optional

 ·  All high pressure valves, pumps, tubing and fittings made in USA with 316SS guarantee the high testing precision and stability.     

 

Ⅲ. Volumetric Expansion Test Stand

 

Standard:

 · SAE-J1401 or customized

 

Application:

 · Volumetric Expansion Test on hoses & tubing. Widely used by hose/tubing makers, Quality Supervision Department, and institutes, etc

 

Technical data:

 · Test medium: Water (Room Temp)

 · Test pressure: 0~40MPa

 · Test pieces: 1 pc

 · Pressure sensor precision: ±0.5%FS

 · Rate of pressure rise: 0~150MPa

 · Constant pressure range: 5%~100%

 · Constant pressure precision: ±1%

 · Expansion rate measuring precision: 0.01mL

 · Expansion range: 0~2mL

 · Dimension: 800×500×1800mm

 

 

Features:

 · Fully automated test stand with high speed data acquisition system

 · History screen and real-time display of pressure-time curves.

 · Test data saved automatically when emergency or power down happens accidentally.

 · Test report exported upon request, and allows printed out for further analysis.

 · All high pressure valves, pumps, tubing and fittings made in USA with 316SS guarantee the high testing precision and stability.

 · Most of the liquid mediums are applicable.

 · High testing precision, and easy to read.

 · Stable and reliable IVS-Test Software features easy operation and user-friendly interface. *(Optional)

 

 

 

IVS General Test Stand

Hose, Pipe, Tubing, Coupling

Cylinder, Vessel

Valve, Instrument

Hydraulic Test, Gas Leak Test

E-mail: sales@ivsna.com
Copyright © 2009 IVS Tester Corporation. All Rights Reserved.

Web Map